SS 304, SS 316, SS 316 Ti, CS OR AS PER Requirement
Type of Test
Hydrostatic Test Pressure
Pneumatic Test Pressure
Condensate Pots were used in steam service for two reasons :
One reason being that a level of condensed water is accumulated
inside of the pot (some pots were vertical others horizontal) and
maintained a fluid volume for displacement equal to or greater than
the volume displacement of the instrument sensing the
flow or pressure.
The second reason for maintaining a liquid inside of the pot
(were alsocalled chambers) was to prevent flashing of the liquid in
the sensing line if a sudden temperature change of the steam is
made. A dam inside of the pot prevented this flashing effect.